
Nipol? NBR
Nipol? nitrile (NBR) elastomers offer a good balance of performance and cost-effectiveness for applications needing fluid resistance, moderate heat resistance, and durability. We offer the broadest portfolio of NBR elastomers of anyone in the industry.
Nipol NBR is classified as a BG-BK polymer according to SAE J200 / ASTM D2000.

The best technical support comes from chemists with years of hands-on experience. Talk to our team about this product today.
Contact UsThe best technical support comes from chemists with years of hands-on experience. Talk to our team about this product today.
Talk to an ExpertKEY ATTRIBUTES
Heat Resistance to 125°C
ZEON offers a full line of acrylonitrile butadiene polymers (NBR) for both general purpose and specialty applications. Nipol NBR elastomers offer the best balance of performance and cost for applications requiring the most severe oil, heat, and chemical resistance.
Broad Offering of Acrylonitrile Content
By varying the acrylonitrile (ACN) content, a good balance of low temperature performance and fuel resistance can be achieved. Nipol NBR is offered at ACN levels ranging from 19% to 50%.
Diverse Portfolio of Products
Nipol NBR elastomers are available in a variety of grades.?Not only do the products cover a wide range of ACN levels, but they can be further categorized based on processability (Mooney viscosity) or by differences in polymerization chemistry. Nipol NBR elastomers can be segmented into hot polymers, NBR/PVC, pre-crosslinked grades, carboxylated grades, and more. Nipol NBR elastomers are also available in a variety of forms (powder, crumb, liquid, and bale).
Type of NBR | Available Grades |
---|---|
Hot Polymers | Nipol 1001CG, Nipol 1001LG, Nipol 1022 |
Carboxylated Grades | Nipol NX775, Nipol 1072x28, Nipol 1072CGJ, Nipol 1072CGX |
Ground Products | Nipol 1401LG, Nipol 1472X, Nipol 1442 |
Spray Dried Products | Nipol 1411, Nipol 1411C, Duomod DP5045 |
NBR/PVC Polyblends | Nipol 1203WN, Nipol DN508SCR, Sivic Grades |
APPLICATIONS
Water Resistance
Nipol 1030 series NBR polymers were developed for use in applications requiring long-term resistance to water exposure. Nipol 1030 series polymers have water soluble ash values below 0.1%.
Suggested Grades
Product Grade | % ACN | Mooney Viscosity | Specific Gravity | Hot/Cold | AO Type |
---|---|---|---|---|---|
1031 | 41 | 55-70 | 1.00 | C | Non-Staining (NS) |
1032J | 33 | 44-58 | 0.98 | C | Non-Staining (NS) |
1052J | 33 | 41-51 | 0.98 | C | Non-Staining (NS) |
1034-60 | 21 | 55-70 | 0.95 | C | Staining (SS) |
Adhesives
Hot polymers are traditionally used in adhesives because they have a highly branched microstructure. This results in increased entanglements between polymer chains, which in turn imparts better heat resistance and grip to the adhesive. Many of the baled adhesive grades are also available in a crumb form to ease the solvation process.
Suggested Grades
Product Grade | % ACN | Mooney Viscosity | Cement Viscosity (cps) | Specific Gravity | TG (°C) Typical Value | Median Particle Size (mm) | Hot/Cold | AO Type |
---|---|---|---|---|---|---|---|---|
1001CG | 41 | 70-95 | · | 1.00 | · | · | H | Staining (SS) |
1001LG | 41 | 70-90 | · | 1.00 | · | · | H | Non-Staining (NS) |
1401LG | 41 | 70-90 | 1,000-10,000 | · | -18 | 9.5 | H | · |
1442 | 33 | 75-90 | 2,000-10,000 | · | -25 | 9.5 | C | · |
1472X | 27 | 22-35 | 100-1,500 | · | -18 | 9.5 | C | · |
Processing Aids
Nipol 1312 and Nipol 1312LV have such low molecular weights that they are actually highly viscous liquids. These grades are often combined with traditional nitrile polymers to reduce compound viscosity and improve the knitting and flow characteristics of the compound. Liquid grades maintain properties better than typical plasticizers after aging and also cannot be extracted since they are polymers and will crosslink into the polymer backbone.
Suggested Grades
Product Grade | % ACN | Viscosity (cps) | Specific Gravity | Hot/Cold | AO Type |
---|---|---|---|---|---|
1312 | 28 | 20,000 - 30,000 | 0.96 | H | NS |
1312LV | 26 | 9,000 - 16,000 | 0.96 | H | NS |
Abrasion Resistant Compounds
Carboxylated nitrile (XNBR) is polymerized with acrylonitrile and butadiene but also incorporates a third, carboxyl-containing monomer into the polymer chain.? Compared with conventional NBR, XNBR has higher tensile strength, modulus, and hardness, but the key advantage is the significant improvement in abrasion resistance. Nipol NX775 offers enhanced scorch safety, allowing for a wider processing window and making it a viable option in difficult to mold parts.
Suggested Grades
Product Grade | % ACN | Mooney Viscosity | Specific Gravity | Hot/Cold | AO Type |
---|---|---|---|---|---|
NX775 | 27 | 35-53 | 0.98 | C | Non-Staining (NS) |
1072 | 27 | 40-55 | 0.98 | C | Non-Staining (NS) |
1072CGJ | 27 | 30-40 | 0.98 | C | Non-Staining (NS) |
1072CGX | 27 | 20-30 | 0.98 | C | Non-Staining (NS) |
1072X28 | 27 | 35-55 | 0.98 | C | Non-Staining (NS) |
Stator Applications
Nipol 3640S was specifically developed for stator applications in the oil field industry. Nipol 3640S is a low viscosity polymer to aid in processing and also offers improved scorch safety over traditional NBR grades. Nipol stator grades maximize in-service parameters and are optimized on the relationship between dynamic properties and pumping efficiency. Testing has also shown superior hot water adhesion compared to other available grades.
PVC Modification
ZEON makes many grades of acrylonitrile butadiene copolymers that can enhance the properties of flexible PVC compounds. These products are very easy to incorporate into PVC compounds due to the fact that they are available as a liquid or fine powder. Some of the benefits of introducing NBR as a modifier into a PVC compound include improved mechanical properties, impact resistance, chemical resistance, and low temperature flexibility.
Suggested Grades
Product Grade | % ACN | Mooney Viscosity | Specific Gravity | TG (°C) Typical Value | Median Particle Size (mm) | Hot/Cold | Partioning Agent |
---|---|---|---|---|---|---|---|
1411 | 38 | · | · | -19 | 0.1 | H | · |
1422 | 33 | · | 0.98 | -26 | 0.1 | · | Mixed |
Friction Materials
Nipol 1411 is a very fine pre-crosslinked and branched 38% ACN NBR powder. ?It is the industry standard in the modification of friction lining compounds. The uniform particle size of Nipol 1411 makes it a more effective modifier than other polymer-based options. While performance improvements are formulation dependent, typical benefits include improved pre-form green strength, increased brake effectiveness, fade resistance and compressibility, as well as other benefits like noise control, crack resistance and overall toughness.?
Suggested Grades
Product Grade | % ACN | TG (°C) Typical Value | Median Particle Size (mm) | Hot/Cold | Partioning Agent |
---|---|---|---|---|---|
1411 | 38 | -19 | 0.1 | H | Talc |
1411C | 38 | -19 | 0.1 | H | Calcium Carbonate |
GRADES
Nipol? Nitrile Elastomers (NBR)
Product Grade | % ACN | Mooney Viscosity | Specific Gravity | Hot/Cold | AO Type | Special Properties / Applications |
---|---|---|---|---|---|---|
1000x132 | 50 | 45-65 | 1.02 | C | NS | Ultra-high ACN level for maximum oil and fuel resistance and low gas permeability. |
DN4580 | 45 | 73-87 | 1.00 | C | NS | High ACN for balance of low temperature, fuel resistance, and low fuel permeability. |
DN4555 | 45 | 48-63 | 1.00 | C | NS | High ACN for balance of low temperature, fuel resistance, and low fuel permeability. |
DN4555A | 45 | 42-52 | 1.00 | C | NS | Slightly lower Mooney grade of DN4555. |
1001CG | 41 | 70-95 | 1.00 | H | NS | Excellent oil and fuel resistance. Has controlled cement viscosity. Useful in adhesives. |
1001LG | 41 | 70-90 | 1.00 | H | NS | Similar to 1001CG, but can be dissolved in solvents without milling. Contains no fatty acids or soaps. |
1051 | 41 | 63-78 | 1.00 | C | NS | Easy-processing version of Nipol 1041 with similar properties. Widely used in the petroleum industry. |
1031 | 41 | 55-70 | 1.00 | C | NS | Excellent fuel and water resistance. Very low corrosion to metals. |
1041 | 41 | 75-90 | 1.00 | C | NS | Intermediate Mooney viscosity nitrile rubber. |
1041L | 41 | 55-70 | 1.00 | C | NS | Special purpose, intermediate Mooney viscosity nitrile rubber. Combines excellent physical properties and processability with very high oil resistance. Recommended for oil field parts and other applications requiring high oil resistance. |
DN4080 | 40 | 73-88 | 1.00 | C | NS | Low mold fouling, fast curing and easy processing. High oil and fuel resistance. |
DN4050 | 40 | 45-55 | 1.00 | C | NS | Low mold fouling, fast curing and easy processing. High oil and fuel resistance. |
4040S | 40 | 30-40 | 1.00 | C | NS | Low viscosity polymer with excellent processing characteristics. Ideal for stator applications. |
DN3650 | 36 | 45-55 | 0.98 | C | NS | Low mold fouling, fast curing and easy processing. Good balance of low-temperature properties and solvent resistance. |
DN3635 | 36 | 30-40 | 0.98 | C | NS | Low mold fouling, fast curing and easy processing. Good balance of low-temperature properties and solvent resistance. |
3640S | 36 | 30-40 | 0.98 | C | NS | Low viscosity polymer with excellent processing characteristics. Ideal for stator applications. |
DN3380 | 33 | 72-87 | 0.98 | C | NS | Low mold fouling, fast curing and easy processing. Good balance of low-temperature properties and solvent resistance. |
1042 | 33 | 73-83 | 0.98 | C | NS | General-purpose, high Mooney viscosity nitrile rubber. |
1052 | 33 | 45-60 | 0.98 | C | NS | Excellent general purpose nitrile. Provides exceptional processing and blending with other polymers. |
1032J | 33 | 44-58 | 0.98 | C | NS | Excellent water resistance with very low metal corrosion. Very good building tack. |
DN3350 | 33 | 42-57 | 0.98 | C | NS | Low mold fouling, fast curing and easy processing. Good balance of low-temperature properties and solvent resistance. |
1022 | 33 | 40-55 | 0.98 | H | NS | Medium viscosity, hot polymer commonly used in adhesive applications |
1052J | 33 | 41-51 | 0.98 | C | NS | General-purpose, intermediate Mooney viscosity nitrile rubber. |
DN3335 | 33 | 30-40 | 0.98 | C | NS | Low mold fouling, fast curing and easy processing. Good balance of low-temperature properties and solvent resistance. |
1052-30 | 33 | 25-40 | 0.98 | C | NS | Low Mooney version of Nipol 1052. |
DN219 | 33 | 20-35 | 0.98 | C | NS | General-purpose low, Mooney viscosity nitrile rubber Designed for injection molding and resistance to mold fouling. |
DN202 | 31 | 58-68 | 0.98 | C | NS | General-purpose, intermediate Mooney viscosity nitrile rubber for industrial and automotive hoses and seals, printing rolls, and applications requiring easy processing. |
1043 | 30 | 73-83 | 0.97 | C | NS | General-purpose nitrile rubber for industrial and automotive hoses and seals. |
1053 | 29 | 45-60 | 0.97 | C | NS | Used where low temperature and good mold flow are required. Easier processing than Nipol 1043. |
DN302H | 28 | 73-83 | 0.97 | C | NS | General-purpose, low ACN, high Mooney viscosity NBR. |
DN302 | 28 | 58-68 | 0.97 | C | NS | General-purpose, low ACN, medium Mooney viscosity NBR. |
DN2850 | 28 | 42-57 | 0.97 | C | NS | Low mold fouling, fast curing and easy processing. Good balance of low-temperature properties and solvent resistance. |
N917 | 23 | 55-70 | 0.95 | C | SS | Medium-high viscosity for compression/transfer molding. Provides oil resistance and operating service of -50°C to 125°C. High resilience. Low water swell. |
1094-80 | 22 | 65-80 | 0.95 | C | NS | Low temperature resistance with outstanding physical properties. |
1034-60 | 21 | 55-70 | 0.95 | C | SS | Provides low temperature and very good water resistance. |
DN401L | 19 | 60-70 | 0.94 | C | NS | Very good low temperature flexibility and good processing properties. Higher-viscosity version of Nipol DN401LL. |
DN401LL | 19 | 32-44 | 0.94 | C | NS | Very good low temperature flexibility and low viscosity for superior processing properties. |
Nipol? Carboxylated Nitrile Elastomers (XNBR)
Product Grade | % ACN | Mooney Viscosity | Specific Gravity | Hot/Cold | AO Type | Special Properties / Applications |
---|---|---|---|---|---|---|
NX775 | 27 | 35-53 | 0.98 | C | NS | Scorch resistant grade with excellent processing characteristics. Used in high-performance injection molding, rolls, calendered belting, and extruded hose. Carboxyl content is 0.083 EPHR. |
1072 | 27 | 40-55 | 0.98 | C | NS | Oil-resistant mechanical goods with outstanding abrasion resistance. Carboxyl content is 0.075EPHR. |
1072CGJ | 27 | 30-40 | 0.98 | C | NS | Higher Mooney grade of 1072CGX. |
1072CGX | 27 | 20-30 | 0.98 | C | NS | Cement-grade version of Nipol 1072. Excellent modifier for composite resin systems, prepreg and towpreg, as well as adhesives. |
1072X28 | 27 | 35-55 | 0.98 | C | NS | Pre crosslinked version of Nipol 1072. Exhibits very low nerve for extrusion and calendered goods. |
Nipol? Liquid Nitrile Elastomers
Product Grade | % ACN | Viscosity (cps) | Specific Gravity | Hot/Cold | AO Type | Special Properties / Applications |
---|---|---|---|---|---|---|
1312 | 28 | 20,000 - 30,000 | 0.96 | H | NS | Plasticizer used for nitrile, neoprene and PVC compounds. Improves knitting and flow. May also be used in plastisols and phenolic resins. |
1312LV | 26 | 9,000 - 16,000 | 0.96 | H | NS | Low viscosity version of Nipol 1312. |
Nipol? Nitrile Powder and Crumb Elastomers
Product Grade | % ACN | Mooney Viscosity | TG (°C) Typical Value | Median Particle Size (mm) | Partioning Agent | Special Properties / Applications |
---|---|---|---|---|---|---|
1401LG | 41 | 70-90 | -18 | 9.5 | · | Ground crumb with silica partitioning agent. Good solubility for use in adhesive applications. |
1411 | 38 | · | -19 | 0.1 | Talc | Very fine crosslinked powder ideal for phenolic resin modification. Widely used in friction products. Contains talc partitioning agent. |
1411C | 38 | · | -19 | 0.1 | Calcium Carbonate | Very fine crosslinked powder ideal for phenolic resin modification. Widely used in friction products. Contains calcium carbonate partitioning agent. |
1442 | 33 | 75-90 | -25 | 9.5 | Talc | Crumb rubber with talc partitioning agent. Used in coal tar and asphalt modification. |
1472X | 27 | 22-35 | -18 | 9.5 | · | Carboxylated nitrile crumb, used in epoxy modification, for adhesives and composites. |
Zealloy? Modifiers for Thermoplastics
Product Grade | % ACN | Mooney Viscosity | Specific Gravity | TG (°C) Typical Value | Median Particle Size (mm) | Partioning Agent | Special Properties / Applications |
---|---|---|---|---|---|---|---|
1422 | 33 | · | 0.98 | -26 | 0.1 | Mixed | Very fine crosslinked powder used as a flexibilizer for PVC compounds. |
Nipol? Polyblends and Oil-Extended Nitrile Elastomers
Product Grade | NBR/PVC Ratio | % ACN | Mooney Viscosity | Specific Gravity | Polyblend=PB Pre-plasticized=PP | Special Properties / Applications |
---|---|---|---|---|---|---|
DN508SCR | 70/30 | 38 | 40-504 | 1.08 | PB | A fully fluxed NBR/PVC polyblend. Used in hose covers, shoe soles, and cable jackets. |
1203W | 70/30 | 33 | 55-70 | 1.07 | PB | A fully fluxed NBR/PVC blend with improved ozone and abrasion resistance. Usedin hose covers, shoe soles, and cable jackets. |
DN171 | 70/30 | 30 | 66-81 | 1.07 | PB | A fully fluxed NBR/PVC blend with improved ozone and abrasion resistance. Used in hose covers, shoe soles, and cable jackets. |
1082V | · | 34 | 30-45 | 0.98 | PP | Used for soft rolls and other low-durometer goods. Contains 50 phr DIDP plasticizer. |
Sivic? Polyblends
Product Grade | NBR/PVC Ratio | % ACN | Mooney Viscosity | Specific Gravity | Polyblend=PB Pre-plasticized=PP | Special Properties / Applications |
---|---|---|---|---|---|---|
Z760 | 70/30 | 45 | 49-611 | 1.07 | PB | Highest ACN content for maximum fuel resistance. |
Z740 | 70/30 | 41 | 45-571 | 1.08 | PB | High ACN content for improved fuel resistance in automotive applications. |
Z730 | 70/30 | 33 | 66-78 | 1.06 | PB | Medium ACN, high viscosity base polymer for improved phyiscal properties and good extrudability. Used for industrial cable and hose. |
Z730M60 | 70/30 | 33 | 56-68 | 1.06 | PB | A low viscosity version of Z730 for faster processing. |
Z711 | 70/30 | 28 | 62-74 | 1.06 | PB | Low ACN base polymer with good extrudability and cold flex properties. Used for industrial and automotive cable and hose applications. |
Z711LV | 70/30 | 28 | 57-69 | 1.07 | PB | A low viscosity versionof Z711 for faster processing. |
Z700PX | 70/30 | 26 | 59-71 | 1.06 | PB | Carboxylated NBR base polymer. Improved abrasion resistance for printing rolls, conveyor belts, and shoe soles. |
Z702 | 70/30 | 23 | 61-73 | 1.06 | PB | Lowest ACN content for improvedcold flexibility. Automotive and industriaclable, hose and belt applications. |
Z620 | 60/40 | 33 | 48-581 | 1.09 | PB | Fuel, ozone, and fire resistant blend for automotive and general-purpose cable, belting, and hose applications. |
Z530 | 50/50 | 33 | 55-651 | 1.13 | PB | Improved fuel, ozone, and fire resistancefor hose covers, cable jackets,conveyorbelts, and cellular goods. |
Z2710 | 60/40 | 33 | 19-29 | 1.09 | PB/PP | Pre-plasticized with 70 phr phthalate-free plasticizer. Excellent for low-durometer applications such as soft printing rolls. |
1MS(1+4)@100°C |
GET TECHNICAL ASSISTANCE